News

  • 0
  • 0

What is Molybdenum Silicide MoSi2 Powder?

The price of nickel and stainless steel rose together. Nickel afternoon hand in hand with stainless steel together turn red up. Due to the temporary easing of geopolitical risks, risk assets are now picking up, nonferrous metals, stock markets, and so on have risen, the overall mood has temporarily improved. Ore prices are strong, the overlay of the epidemic on spot logistics or the formation of a certain impact. Phase, nickel and stainless steel materials to maintain high wide concussion pattern.

Nickel prices based on low inventory, tight supply and demand will still show high wide fluctuations. In addition, the current LME has low liquidity, so its sensitivity to capital will remain relatively high. Shanghai nickel-wide fluctuations are expected to continue in the 200,000-250,000 yuan wide repeated fluctuation trend. While stainless steel is affected by the stronger nickel pig iron, the cost support continues, but note that under the current demand is not effectively released, the upward space may also be affected, the stage is expected to fluctuate between 20000 and 22,000 yuan. The price of nickel produced such fluctuations, indicating that the price of the MoSi2 Powder may also be affected to a certain extent.

Introduction to Molybdenum Silicide MoSi2 Powder
Molybdenum silicide was discovered in 1906. Under different conditions, silicon and molybdenum can form molybdenum trisilicide (Mo3Si), molybdenum pentasilicate (Mo5Si3), and molybdenum disilicate (MoSi2). The most important one is the Molybdenum disilicide (MoSi2), which is a Dalton-type intermetallic compound. The atomic combination in its crystal structure shows the coexistence of metal bonds and covalent bonds, and has excellent high-temperature essential characteristics.
Molybdenum disilicide is an inorganic compound, the chemical formula is MoSi2, gray metal solid. Insoluble in most acids, but soluble in nitric acid and hydrofluoric acid. The two kinds of atoms have similar radii and electronegativity, which is similar to metal and ceramic.  Molybdenum disilicide is electrically conductive and at high temperatures forms a passivation layer of silicon dioxide on the surface to prevent further oxidation.
It can be applied as high-temperature oxidation-resistant coating materials, electric heating elements, integrated electrode film, structural materials, composite reinforcement, wear-resistant materials, structural ceramics, and other fields of bonding materials. 
 

Physicochemical Properties of Molybdenum Silicide MoSi2 Powder
MoSi2 is a kind of intermediate phase with the highest silicon content in the Mo-Si binary alloy system, and it is a Dalton-type intermetallic compound with a fixed composition. It has dual characteristics of metal and ceramic, and is a kind of high-temperature material with excellent performance. Good high-temperature oxidation resistance, oxidation resistance temperature up to 1600, and SiC equivalent; Moderate density (6.24g/cm3); Low thermal expansion coefficient (8.1×10-6K-1); Good electric conductivity; Higher brittle and ductile transition temperature (1000) below the hard brittleness of ceramics. Above 1000 it is metal-like soft plastic. MoSi2 is mainly used as heating elements, integrated circuits, high-temperature oxidation-resistant coating, and high-temperature structural material. 
In MoSi2, molybdenum and silicon are bonded by metal bonds, while silicon and silicon are bonded by covalent bonds. Molybdenum disilicide is gray tetragonal crystal. Insoluble in general mineral acids (including aqua roya), but soluble in nitric acid and hydrofluoric acid mixed acid, has good high-temperature oxidation resistance, can be used as high temperature (<1700) oxidation atmosphere work heating element. 
In an oxidizing atmosphere, a protective film is formed on the surface of dense quartz glass (SiO2) burned at a high temperature to prevent continuous oxidation. When the temperature of the heating element is higher than 1700, SiO2 protective film is formed, which is thickened at the melting point of 1710 and fused with SiO2 into molten droplets.  It loses its protective ability due to its surface-extending action. When the element is used continuously under the oxidant, it forms a protective film again. It should be noted that this element cannot be used for long periods at 400-700 due to strong oxidation at low temperatures.

 

Molybdenum Silicide MoSi2 Powder Properties
Other Names molybdenum disilicide, MoSi2 powder
CAS No. 12136-78-6
Compound Formula MoSi2
Molecular Weight 152.11
Appearance gray to black powder
Melting Point 1900-2050 °C
Boiling Point N/A
Density 6.23-6.31g/cm3
Solubility in H2O N/A
Exact Mass 153.859261

 

Molybdenum Silicide MoSi2 Powder CAS 12136-78-6
 

 
Applications of Molybdenum Silicide MoSi2 Powder
MoSi2 is widely used in heating elements. Molybdenum disilicide heating elements can be used at temperatures up to 1800°C for electric furnaces used in laboratories and production environments in glass, steel, electronics, ceramics, and for heat treatment of materials. Although these components are brittle, they can operate at high power without aging, and their resistivity does not increase with operating time.
 

Main Supplier of Molybdenum Silicide MoSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality molybdenum silicide MoSi2 powder, please feel free to contact us and send an inquiry. ([email protected])

 

Southern Copper Corp (SCCO.N) recently said its Peruvian mine remained closed after a six-week standoff with protesters and blamed the Peruvian government for failing to intervene in the safety of its 1,300 workers and their families.  

The company said in a statement that a recent agreement to end protests at the Cuajone mine required the company to withdraw complaints against protest leaders because railways transporting minerals and supplies remained blocked. Production has been suspended since the end of February.  

Peru's Energy Ministry said in a separate statement that it had also reached an agreement with Southern Copper to start talks to find common ground with local communities.  

"If we shut down for a year, the government will stop receiving more than 3.1 billion soles ($830 million) in taxes and royalties, and 8,000 direct and indirect jobs will be lost. This is what we want to avoid, "Southern Copper added in the statement.

Peru has faced a wave of protests from indigenous communities, who accuse mining companies of not providing enough jobs and funding to poor local residents.  

Central bank officials said last week that protests against copper mines such as MMG's Las Bambas and Southern Copper's Cuajone were dragging down the economy.  

Peru is the world's second-largest copper producer and mining is an important source of tax revenue for the country. It is estimated that the supply and prices of the MoSi2 Powder will be influenced by that.

Inquery us

Our Latest News

What is the scope of application of zinc stearate emulsion?

Water-based zinc stearate mainly uses zinc stearate special additives, sandpaper polishing paint, thermal paper sensitizer functional additives, rubber and water-based paint release agents, etc.…

Advantages of Gallium Nitride

Gallium nitride is a binary III/V direct bandgap semiconductor ideal for high-power transistors that can operate at high temperatures.…

Erbium oxide Er2O3 powder properties

Erbium oxide Er2O3 powder is a pink powder with the chemical formula Er2O3, mainly used as an additive for yttrium iron garnet and a control material for nuclear reactors.…