Precautions for the use of concrete foaming agent

Europe's largest economy, Germany, recently activated an emergency plan to manage gas supplies that the natural gas could be rationed if supplies are disrupted or disrupted by a stand-off over Russian demands to pay for fuel in rubles.  

German Vice-Chancellor, minister of economy and climate protection, said Germany's gas supplies were secure for now, but he urged consumers and businesses to reduce consumption, saying "every kilowatt of electricity counts." 

Germany's gas network regulator can ration gas if supplies run short. Plants would be the first to be affected. Special treatment will be provided to private families, hospitals, and other important institutions.  

Half of Germany's 41.5 million households use natural gas for heating, and industry consumption accounts for a third of the country's 100 billion cubic meters of gas demand in 2021.  

The price of many energy and commodities like the concrete foaming agent could be affected.

What is concrete foaming agent?

Cement foaming agent is called foamed concrete foaming agent. It refers to an admixture that can reduce the surface tension of liquid and produce a large amount of uniform and stable foam. It is an admixture used to produce foamed concrete and can produce a very large amount of foam. substance.

How to use cement foaming agent

1. Because the cement foaming agent generally has a large concentration, directly adding it to the foaming machine will lead to low foam output and waste of the foaming agent. Directly added to the foaming machine generally results in high concentration and cannot produce high-quality foam. At the same time, it is easy to block the liquid inlet pump of the cement foaming machine. The relationship between the dilution ratio of the cement foaming agent and the foaming effect is very large. Therefore, the dilution factor is too high or too low, so there must be a very suitable dilution factor. When determining the reasonable dilution ratio of the cement foaming agent, on the one hand, it is necessary to refer to the dilution ratio suggested by the manufacturer, and on the other hand, it is necessary to do the test directly on the foaming machine to determine the appropriate dilution ratio of the foaming agent.

2. After determining the combined multiple, it needs to be diluted with water to form a foaming liquid, and then the foaming liquid is made into a foam product. Pour the water and foaming agent into a water tank and let it dissolve fully. After observing blisters, pour the prepared cement into the tank, and then use a stirring tool to fully stir it, and then send it through a high-pressure conveying pipe or manually. It is processed into the finished product in the wallboard machine.

Precautions for the use of cement foaming agent

1. Note that when the dilution ratio with water is too low, and the concentration of the foaming agent diluent is too high, the overall output of foam will decrease, and the amount of foaming agent used will increase. When the dilution ratio is less than 30 times, the production of foam decreases, and slumps appear in the slurry. When we dilute to 50 times, the overall foam production increases, and there is no obvious slump in the slurry. increased by 30%.

2. When the dilution ratio is too high, more foam is formed and less liquid is formed, the foam conversion rate of the foaming agent diluent is low, the foam output decreases, and the stability of the foam decreases. Therefore, only when the dilution ratio is appropriate, can the foam with high foam yield and high stability be obtained.

3. Note that when purchasing the main material foaming agent, it does not mean that the dilution ratio is high, but the amount is small. It is necessary to distinguish what type of foaming agent is. It will be less than the amount of animal foaming agent diluted 40 times.

TRUNNANO is a cement foaming agent supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality foaming agent , please feel free to contact us and send an inquiry.

sales@cabr-concrete.com

In 2021, Russia's palladium, nickel and aluminum exports will account for 24.6%, 21.9% and 9.9% of the global total, respectively. Russia exported 2.819 million tons of palladium, accounting for 43.37% of global production. Platinum exports amounted to 962,000 tons, accounting for 15.01% of global production. Russia controls 10 per cent of the world's copper reserves. Russia and Ukraine are also important producers and exporters of neon gas. Markets were volatile after the russia-Ukraine conflict. The London Metal Exchange (LME) nickel, aluminum and copper prices rose 75.3 percent, 28.3 percent and 4.9 percent respectively from the end of last year, thus driving up costs for downstream companies such as electronics, auto parts, military and aerospace. If you are looking for a concrete foaming agent with low price fluctuation range and excellent quality, click here will be a good choice.

Inquiry us