What is 3D printing powder?

3D printing powders are metal powders that are reduced to fine particles. 3D printing metal powder is the initial base material for most 3D printing processes to produce metal parts. 3D printing, also known as additive manufacturing (AM), is the fabrication of parts and products layer by layer. Both the properties of the metal powder and the type of 3D printing process determine the properties of the final product. The properties of a powder depending on how it was produced, which can result in varying particle morphologies and purities.

How to choose 3D printing powder?

Different 3D printing equipment and moulding processes require different particle size distributions. At present, the powder size range commonly used in metal 3D printing is 15-53 μm (fine powder), 53-105 μm (large particle size), and can be relaxed to 105-150 μm (large particle size) in some cases.

The selection of 3D printing particle size of 3D printing powder is mainly based on different energy sources for metal printers.

For printers using laser as the energy source, due to its fine focus spot and fusible fine powder, it is suitable to use 15-53 μm powder as consumables, and the powder supply method is layer by layer;

The powder printing printer with an electron beam as the energy source has a micro-focus point, which is more suitable for melting coarse powder, suitable for 53-105 μm coarse powder;

For coaxial powder feeding printers, powders with a particle size of 105 ~ 150 μm can be used as consumables.

3D printing powders supplier:

We provide nickel-based superalloy powders such as Inconel 718, Inconel 625, CoCrMo, CoCrW and other cobalt alloy powders, Ti6Al4V and other titanium alloy powders, AlSi10Mg, AlSi7Mg and other aluminium alloy powders, SS316L, H13, 18Ni300 and other ferroalloy powders, stainless steel powder, CuSn10, etc. 3D printing powder. Contact us via message or select the desired items to send us an inquiry.

The Payment Term:

T/T, Credit Card, Western Union, Paypal etc.

The term for delivery:

By air, courier or by sea according to the needs of the customer.

Conditions of storage:

1.) Maintain a dry area at the temperature of room.

2.) Avoid high and damp temperatures.

3.) Utilize immediately following the opening of the bag inside.

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of t

Oil prices have fallen but the extent of the autozone trailer hitch market also has a greater impact

Early morning API data showed crude oil stocks unexpectedly rose 1.845 million barrels in the week ended, gasoline stocks rose 1.821 million barrels and refined oil stocks rose 3.376 million barrels. However, as the market is highly unanimous in its

What are the types of foam concrete foaming agents

The foamed concrete foaming agent can make concrete appear a lot of foam to accelerate the formation and use of foamed concrete. Use efficiency and speed up the progress of the entire construction project. Foamed concrete foaming agents are available

What are the Main Properties and Uses of Inconel718

Inconel 718 or In718 is a nickel-chromium-molybdenum alloy. It is an oxidation-resistant and corrosion-resistant material ideal for use in extreme environments under pressure and heat.

What is concrete waterproofing agent

Concrete waterproofing agent can significantly improve the impermeability and waterproofing of concrete, and the impermeability grade can reach P25 or higher. It is especially suitable for concrete for bungalow roof, large volume waterproof concrete,

How is Niobium Carbide NbC powder produced?

Preparation method of tungsten oxide

The main application of titanium diboride TiB2 powder

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

Preparation method of gadolinium oxide

High Purity Copper Powder Cu Powder CAS 7440-50-8, 99%

High Purity Tin Sn Powder CAS 7440-31-5,99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Molybdenum Powder Mo Powder CAS 7439-98-7, 99.9%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Boron Carbide B4C Powder CAS 12069-32-8, 99%

Is Molybdenum Disilicide a Dangerous Good?

High Purity Silicon Si powder CAS 7440-21-3, 99%

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

Properties and applications of boron carbide

High Purity 3D Printing Inconel 625 Powder

The main features of tin sulfide powder

Hafnium Diboride HfB2 Powder Applications

High Purity Spherical Graphite C Powder CAS 7782-42-5, 99.9%

Properties of cuprous oxide Cu2O powder